KYBERLIGHT® Lifetime Warranty RGB Saber Blade

In terms of being built to do what it's advertised for, it's excellent. You'd have to actually legitimately try, in order to manage to break the blade. It's as tough as they say. So, so long as you don't go hitting a brick wall as hard as you can over and over, it's not going to break.

In terms of how well the blade displays colors when used with the Kyberlight, (V5 at the time of this review) Blue, Red, and Green are *very* bright and vivid. Some colors that are made by mixing others, ( like yellow ) tend to have some bleeding/falloff issues. That's easily solved at home, see my next paragraph.

Stock, these blades aren't diffused, so you will see color bleeding/mixing when using colors like yellow. (I.E. The bottom half of the blade will be yellow, as you'd expect, but with orange streaks throughout the blade, and the tip will be green, due to the green and red light that are being projected from the saber's RGB LEDs to make yellow, escaping the blade at varying speeds/amounts that differ from one another.) Diffusing a blade yourself is incredibly easy, and takes two seconds to do, and will encourage colors that are created using RGB combos to evenly mix throughout the blade, making them a standout solid all the way to the tip. If you use Red, Blue, or Green, then you don't have to worry about that, as I said above. If your main color is yellow, (like mine) then I recommend getting some 5-10$ cellophane from your local store. I'd say a roll with a width of 40" as that will cover all lengths of kyberlight blades. (currently 24" to 36") A single cheap roll would let you diffuse dozens or hundreds of blades. Youtube has a simple short tutorial for how to insert the cellophane into your blade, it requires no glue or anything, and takes, like I mentioned earlier, a few seconds at most.

I'm still going to leave a 5 star review, as diffusal of the blade is easy to do at home if your favorite color happens to be yellow, and the blade itself is perfectly suited for combat as advertised, and is also one of the only blades that I know of that comes with a lifetime warranty. They'll replace your blade with basically no questions asked if you manage to break it somehow, and their customer service is quick. Very quick, like they usually get back to me within minutes, not days or weeks like other saber makers. *Looking at you, SaberForge.*

I have had my sabers and blades for about 5 years now and they have been amazing the blades are incredibly strong and even if you manage to break them they're amazing customer service steps right in and gets you a new one 10 out of 10 will definitely buy again

Sturdy and stable! Favorite saber company!

Tough, durable, well lit…. What else can you ask for.

Great blade illumination that looks like a neopixel for RGB sabers.

Tough blade without a doubt. Haven't had a chance to duel with it yet, but my expectations are high.

Amazing quality

Bought these for dueling with my son. Very durable and worth every penny.

My kids have hit everything they could and have not had any problems

Always the best the only ones I actually trust to hold up

Yes it was cool

I’ve been dueling with my 9 year old son and it’s been great. He hit’s pretty hard and so far so good. I like the way you can change the settings but there is a bit of a learning curve as those two buttons are doing a lot. But once you get it figured out it is great. I just kept the FAQ page opened in a browser on my phone to consult. Also, the “control lock” really helps when dueling so you don’t end up changing all of your settings. Customer service has been great as well. It does take two days for the first response but then they are there.

Very durable blades! The tips can wiggle loose while dueling, but superglue can fix that easily.

Great service

The price point was what I was looking for but the quality was off. It didn't fully illuminate through the blade. Then while I was moving the box I heard a rattling. Turns out the mirror piece had come off of the tip. So now I have to glue the pieces back together and try it again. Not what I was hoping for but then again it was cheaper than their competitors. So hopefully when the mirror part is installed I will have a better result.

Good soup

1st we bought them to use in FMA training and sparing. So we went with KYBER for the blade strength and warranty. We’ve had them for a few weeks and we work them hard. Last night the reflector in one of the blade tips popped off. Relatively easy fix… but it still broke. The handles are solid so far, but the only hilt configuration that is really useable without gloves is the one the basic unit comes with. The others are machined in a way that leaves serious hot spots and edges that just don’t work well on a “live” blade setup. The electronics are good so far and have held up to substantial hard work in terms of durability. As with all sabers, getting the controls down takes a quick minute. Also the color combinations of the accessories, just don’t fully match, specially the “silvers” aren’t the same and the fit on the hilts leaves something to be desired when used for hard sword work on the alternate configurations. Lastly the weight is substantial and while workable two handed, one handed work is pretty unbalanced. You can compensate by holding the saber at the very end and using the lower nob screw as a brace support between the pinky and ring finger. All screws and parts must be firmly tightened and even then they come loose quickly in actual sparing.

For over $600 on two sabers with a total of 6 blades at different lengths, not a bad value… and the setup is definitely better than the cheap internet stuff, but personally I expected the fit and finishing to be better.

Feels very sturdy and strong! To compare, LGT blades' tip is smaller than the Kyberlight blade tips, so the tips are more secure in the blade tubing.

Default blades will get you through heavy fights, night duels look good, and they’re bright. The homies love em when we fought, just watch the fingers I guess.

Wonderful

Hands down best lightsaber blades on the market!!!

Small complications with shipping, but on my end, ended up getting lost. Customer Service was quick to reply and sent a new one with the correct address and was here within a week. Thank so much for the help KyberLight.

Top quality dueling product

Top quality dueling blade

This seems to be a sturdy strong blade. The only draw back (if you can call it a draw back) is it's heavier than expected but then, I am used to mid weight blades. It does mess with the balance of my saber. No diffusser cellophane in the blade but its thickness difusses the light well enough without it. price was good and then on top of it, it was on sale and shipping was less expensive than other sellers. So overall - good blade - good price

These blades have improved since the first ones I bought in 2019! The LED lights shine brighter and more consistently through to the end of the blade than the older version. Very luminescent, sturdy, and well balanced. I will always buy from Kyberlight!

I bought the kyberlight V5 on Founding site [Capmfire]. But my saber will reach to me on october.
I bought a good blade for this.
Thank you.

The blade holds up great at full combat. They look good, and I'm never concerned that they will damage too easily.

Kyberlight blades are some of the best in the saber community, they are great for dueling. I will definitely purchase from Kyberlight again in the future!