TXQ SNV4 Pixel 2 Button Operations

Buttons: There are two orientations for the Power and AUX buttons.  If your saber buttons are vertical or up and down, the TOP button is Power and the BOTTOM button is AUX.  If your saber buttons are horizontal or across the saber then the LEFT button is Power and the RIGHT button is AUX.  

Blade Length: Before putting your saber in Standby Mode you can change the Blade length by tapping POWER 3 times.  You will hear an announcement of the new blade length.

Stand By Mode:  Enter Standby mode by holding POWER until hearing the announcement of 'Power On'

Auto Shut OFF: The saber will automatically power completely off after 10 minutes of nonuse to save battery. 

While in Standby:

Function	Control	Notes
Turn On	Tap the button	The Saber will turn on.
Power On Motion	Twist the Saber	This motion is a quick twist of the saber one way and back.
Volume Control	Hold the POWER and AUX button at the same time until you hear the beep then release	Adjust volume with POWER(UP) and AUX(DOWN) buttons then tab both again to set volume.
Switch Boot Effects	Hold the POWER button until you hear a beep then release	You will hear a confirmation of the new Boot Effect.
Switch Blade Effects	Hold the AUX button until you hear a been then release	You will hear a confirmation of the new Blade Effect. Stable, Unstable, Pulse, Ghost, Cross, Infinity, Wave, Rainbow, Fire
Switch Blade Effects Motion	Hold the Saber upward, hold AUX button and twist Saber	You will hear a confirmation of the new Blade Effect. Stable, Unstable, Pulse, Ghost, Cross, Infinity, Wave, Rainbow, Fire
Sound Font Selection	Tap AUX	You will hear a sound confirming the switch.

While On:

Function	Control	Notes
Blaster Deflection	Tap the AUX button
Lock Up	Hold the AUX button
Color Change	Point the Saber blade downwards, hold the AUX button and twist the saber
Flash on Clash on/off	Hold POWER and AUX buttons at the same time until you hear the beep then release
Turn Off	Tap POWER Button
Turn OFF Motion	Twist the Saber	This motion is a quick twist of the saber one way and back.
Drag	Hold the POWER button then hit the saber.
Melt	Hold the AUX button then thrust the saber horizontally forward.
Force	When the Blade is up hold the AUX button then twist the saber.